Construction & Waterproofing Materials

We offer geotextile fabric that has the right permeability to ensure that the sand is properly filtered or drained. The properties of our fabric make it an ideal product for various applications like assisting in drainage, controlling erosion, and even increasing the stability of soil. It is available in all forms to aid stabilization, filtration, and separation. You can count on us for your requirement of wholesale geotextile fabric in India. Our staff has been trained to ensure the fabric has a precise composition.

PP PE waterproofing membrane is a composite sheet membrane made of soft polyethylene(PE) with nonwoven polypropylene(PP) fabric laminated on both sides to enable the membrane fixed firmly onto mortar.

PP PE waterproofing membrane is flexible and conforms to various contours of the wood framing, bending upward at the walls and folding into corners. It can be applied directly with thin-set mortar, ceramic and stone tile, provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile. It has been an ideal membrane to protect the substrate from moisture penetration.

PP+PE+PP composite waterproof membrane is made by multiple-ply different materials, especially its aging and weathering resistance layer enables the membrane possess more longer effective age. It can bond with many kinds of adhesions, firm and secure. In case of cement-base, cementations agent can be used, the cementations agent can easily enter into the non-woven felt layer, forms a well-combination with cement after solidification, permanent durability.

• Non-toxic, no pollution, environmental protecting product.
• Can be used for many different surfaces, especially for cement basement.
• Tough, impermeable, multi-layered sheet;
• High tension strength, good cold flexibility.

Usage

• The application is simple and no pollution. It is mainly used in the middle of building for waterproofing. On this layers of protection and decoration are needed;
• When application, pour the adhesive materials homogeneously on the smooth roof deck, then roll the membrane to make is fully adhered to the deck.
• The adhesive materials are usually made form cement or other building glue.
• Products used in roofing, basement, restroom, water conservation, warehouse to protect structure from water infiltration.

Fibre Glass Mesh is used where two materials with different coefficient of expansion come together. E.g. joints of masonry, reinforced cement concrete, stone etc. Fibre Glass Mesh absorbs tension and forms a flexible, yet extremely tough durable layer with a plaster, facilitating adherence to variety of masonry materials. Unlike metal or plastic based alternatives (chicken mesh) Fibre Glass Mesh doesn’t break down due to corrosion, is easy to use and pile, cuts effortlessly and lies flat. Fibre Glass Mesh exceeds all the requirements of tensile strength and resistance to acid, salts, water and alkali. Fibre Glass Mesh comes with alkali resistance properties and provides reinforcement against impact.

Features:

• Protects the surface from cracking and improves its mechanical strength.
• Easy to handle and use.
• High resistance to tearing and stretching,
• It does not emit toxic and harmful substances,
• Resistant to Alkalis, does not decompose and will not rust over time,

Glass Fiber is a monofilament glass fiber with Engineering Properties. Millions of mono fibers get uniformly disperse in every cubic meter of Concrete/Mortar and develop Micro Secondary Reinforcement (MSR) system. Glass Fiber improves Quality, Durability and Service life of Structure. We at Riddhi Enterprise offer quality Chopped Strand that are produced by chopping dry fiberglass into certain length. The strands are coated with silica based coupling agent system and are compatible with different resins. The chopped strand are mainly used in the automobile industry, home appliances, valves, pump housing, chemical corrosion control and sports equipment. This can also be used for reinforcing cement with the main process of pre-mixing and spraying. We provide chopped strands in range of 6 mm, 12 mm,24 mm, 36mm

X-Seal PU25 is a fast-curing one-component moisturecuring polyurethane adhesive sealant that turns into a flexible, durable and resistant elastomeric seam and has a very good adhesion to most industrial materials, without primer such as glass, anodized aluminum, lacquered metal, wood, FRP, and concrete.

Advantages

• Meets SCAQMD Rule 1168 & LEED VOC Limit
• Formaldehyde free
• Suitable for use in food processing areas
• Single component, no mixing required
• Easy to use
• High elasticity
• Excellent tear, vibration and weathering resistance
• Durable resilient seal
• Suitable for a wide variety of substrates
• Non staining
• Short tack free time
• Can withstand foot traffic
• Primer not required for most common substrates.

Uses

• High movement joints
• Construction joints
• Crack sealing
• General purpose joint sealing
• Joint sealing of:
• Highway structures
• Precast units
• Basements
• Cladding
• Floors
• Subways

Sikament®-4101 NS Imparts high workability and gives workability retention.

Uses
Sikament®-4101 NS a plasticizer for free-flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non-structural elements.

Specially recommended for the following types of concrete

• Ready mix concrete
• Precast concrete
• Site batched concrete

Characteristics / advantages
Sikament®-4101 NS produces a more uniformly cohesive high quality free flowing concrete.

It has the following advantages:

• Improves water reduction.
• Improves strength and density
• Improves consistence retention
• Improves durability
• Improves water tightness/ waterproofed concrete
• Improves surface finish
• Improves cohesion properties

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses
Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free flow ensures high level of contact with load bearing Area

Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.

Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.

Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.

Sikadur-Combiflex® SG-10 P is a flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. Thickness 1,0 mm. The product is part of the Sikadur Combiflex® SG System.

CHARACTERISTICS / ADVANTAGES

• Advanced adhesion, no activation on site required
• Highly flexible - high crack and joint bridging ability
• Good chemical resistance
• Good resistance to ageing
• Resistant to UV exposure
• Resistant to root penetration
• Performs well within a wide range of temperatures
• Plasticiser-free
• Hot air weldable
• Can be used in contact with potable/drinking water

USES
Sealing all types of joints and cracks in many different structures and applications including:

• Tunnels and culverts
• Hydroelectric power plants
• Sewage treatment plants
• Basements
• Water retaining structures
• Drinking water reservoirs

Sealing of:

• Construction joints
• Pipe penetrations

BOSS® 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. BOSS® 333 has excellent insulating properties and superb adhesion to virtually all building materials

USES

• Air sealing
• Partition walls with ceilings
• Through penetrations around cables and pipes
• Seams between chimneys, roof protection, roof panels and wall panels

FEATURES

• Meets CA-25-4
• UL Classified, Tested to ASTM E-84
• Triple Expanding
• Weatherproofs against wind and moisture
• Fills gaps, cracks and holes
• Seals out insects and pests
• Can be sanded, painted and stained
• Complies with EPA Method 24 and California Air Resource Board Method 310
• VOC Compliant

SikaRep® Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement.

USES

• SikaRep® Microcrete-4 is suitable for structural repairs to bridges, columns, etc. It is mainly recommended for the repair of damaged concrete structures e.g.
• Bridge columns and beams
• Concrete piling
• Slabs, etc.
• It is also recommended for grouting of large gaps

CHARACTERISTICS / ADVANTAGES

• A properly designed concrete which can be pumped of poured into restricted.
• Placement without any vibration Expansion system compensates for shrinkage settlement in plastic stage
• Easy to mix and apply, high flow characteristic, rapid strength development
• Good bond with old concrete
• Impact and vibration resistant
• Placing thickness up to 100 mm
• Contains no added chloride

A high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane. It is specially formulated for easy roller application of all permanently flexible, tough, high build, long-life waterproof barriers.

Features

• Easy, fast, high build, one-coat application with brush or roller is possible.
• Simple, seamless, fast-cure membrane.
• Excellent chemical resistance, suitable for acid sulphate soils.
• Waterproof — resists ponded water.
• Permanently flexible — total adhesion.
• Root penetration resistance - DIN4062 compliance.
• Systems for Total Project Specification.

Silcor® 560 is a pure polyurethane elastomer. It does not contain bitumen or tar and will not bleed or stain. It is engineered to allow high build application without multi-layering and/or reinforcing mat. Design a Total Waterproofing Envelope package with waterproofing systems from GCP Applied Technologies.

Uses

• Wet Areas — bathrooms, shower trays, laundries, toilets, spas.
• External (non-exposed) — balconies, roof-decks, sill or window flashings, podiums, planters.
• External (exposed) - non trafficable areas, e.g. wall, planters.
• Tanking — retaining walls, landscaped areas, ponds, water features, non-potable water storage.
• It can be applied to most stable surfaces — block, brick, concrete, render, timber, CFC, GRC, ALC, etc.
• Vertical and horizontal application.

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. Renderoc Plug provides an initial set time of approximately one minute.

Uses
For the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.

Advantages:

• Emergency water-stopping capability
• Single component - only the addition of clean water is required
• Excellent bond to the substrate
• Low exotherm minimises thermal cracking
• Pre-bagged formulation to overcome variations in site batching
• Contains no chloride admixtures

X-Pruf PU1 Plus is a single component PU-A waterproofing membrane manufactured from hybrid polymers to produce a strong ultra low VOC waterproofing membrane that can be applied to 'green' concrete reducing the waiting time before having to apply a waterproofing membrane.

Uses:
Waterproofing of:

• Wet areas
• Planters
• Plaza decks
• Slab foundations
• Penetrations

Advantages:

• Liquid applied, continuous and seamless
• Elastomeric
• Does not allow tracking
• Secure waterproof penetrations
• Can be used in congested areas
• Easy to use
• Easy to repair
• Does not contain tar

SikaCeram®-155 is a cementitious polymer modified tile adhesive with no vertical slip. It can create adhesive layers up to 10 mm thickness. It is suitable for Tile size upto 4 sft on Floor and Wall. Indoor application only.

X-Pruf CrystalCoat is a one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure. Composition X-Pruf CrystalCoat consist of active, non soluble, non toxic, waterproof chemicals contained in a cementitious carrier that crystallizes in the presence of water and free lime in the concrete

Advantages:

• Penetrates concrete, seals capillaries and hairline cracks
• Withstands positive and negative hydrostatic pressure
• Suitable for use with potable water
• Easy to apply
• Can be used on damp concrete
• Crystals continue to grow until cracks are sealed
• Chloride free
• Allows concrete to breath
• No odor

Uses:

• Concrete and block substrates
• Above or below ground structures
• Potable water tanks
• Wastewater structures
• Basements
• Elevator pits
• Tunnels
• Interior and exterior waterproofing